Understanding Common LG Washer Error Codes in Decatur, GA

Introduction

When it comes to keeping your laundry routine running smoothly, a dependable washing machine is key. LG washers are known for their reliability, but like all machines, they can occasionally throw up an error code. These codes can be puzzling, but understanding them can help you identify the problem and find a solution. In this post, we’ll break down some common LG washer error codes and what you can do to troubleshoot them.

Servicing homeowners throughout Decatur, Tucker, Stone Mountain, Lithonia, Ellenwood, and Stockbridge. Every visit starts with a $89 diagnostic fee (waived if parts are stocked and repair is approved on-site) backed by an EPA 608 Certified technician and a 90-day labor warranty.

Common LG Washer Error Codes

1. LE (Locked Motor Error)

This error indicates that the washing machine's motor is having difficulty spinning. It may also mean there’s an issue with the wiring.

#### Troubleshooting Steps:

• Check the Load: Ensure that the load is balanced. Overloading or underloading can cause issues.


• Inspect Wiring: Look for any visible damage or loose connections in the wiring.


• Reset the Washer: Unplug the washer for a few minutes and then plug it back in.

2. OE (Drain Error)

If you see the OE error code, it means that your washer is having trouble draining water.

#### Troubleshooting Steps:

• Check the Drain Hose: Ensure it's not kinked or clogged. A blockage can prevent water from flowing properly.


• Inspect the Drain Filter: Clean out any debris from the filter as it can contribute to draining issues.


• Run a Spin Cycle: After addressing the issues above, run a spin cycle to see if the problem persists.

3. UE (Unbalanced Error)

The UE error indicates that the washer is unable to properly balance the load.

#### Troubleshooting Steps:

• Realign Load: Open the washer door and redistribute the items to ensure they are balanced.


• Check Feet Adjustments: Ensure the washer is leveled. Adjust the feet if needed.


• Use Fewer Items: Try washing fewer items to see if the error resolves.

4. dE (Door Error)

The dE error signals that there might be a problem with the door lock or the door sensor.

#### Troubleshooting Steps:

• Close the Door: Ensure the door is completely closed and latched.


• Inspect the Door Lock: Look for any visible damage. If the door lock is malfunctioning, it may need replacement.


• Reset the Machine: Disconnect the power for a few minutes, then reconnect it.

5. tE (Temperature Error)

This code means that the washer has detected issues with the water temperature.

#### Troubleshooting Steps:

• Check Hot Water Supply: Ensure that the hot water supply is turned on and functioning.


• Inspect Temperature Sensor: Clean the sensor and check for faults. If it’s damaged, it might require a replacement.


• Run a Diagnostic Test: This may help isolate the exact issue.

When to Call a Professional

It's important to remember that while you can perform some troubleshooting steps on your own, there are instances when a call to a professional is the best course of action.

If you’ve followed the steps above and your LG washer is still displaying error codes, or if you experience issues like loud noises or leaks, it's best to reach out to an expert. At Decatur Solution Works, our skilled technicians are ready to help you diagnose and repair your washer efficiently.

Call us today at 678-525-0474 for same-day appliance repair services throughout Decatur, Stone Mountain, Lithonia, Tucker, Conyers, and DeKalb County.

Conclusion

Understanding LG washer error codes can save you time and frustration. By following our troubleshooting tips, you can quickly determine what might be going wrong. However, if the problems persist, don’t hesitate to reach out to us at Decatur Solution Works. We are here to help you keep your home running smoothly!